tc5 tcxo series surface mount temperature compensated xtal oscillator with o r without trimmer clipped sine wave compatible standard specifications overall frequency 1.5 to 10 ppm over operating temperature range available operating temperature range 0 to +50 c to - 40 to +85 c available supply voltage (vcc) 5.0 volts and 3.3 volts available output load (see test circuit 1) part numbering guide tcxo package frequency stability (fs) frequency in mhz 3tc5 1 c 100 a - 10.0m - xxx (internal code or blank) (425) 776 - 1880, fax: (425) 776 - 2760, ple - sales@pletronics.com, www.pletronics.com 27 jan 2004 pl tronics, inc. mechanical: not to scale inches (mm) 1=11.4x9.6x2.0mm, w/o trimmer 8=11.4x9.6x2.0mm, with trimmer operating temperature range {tightest fs available} a: 0 to +50 c { 1.5 ppm } b: 0 to +70 c { 1.5 ppm } c: -10 to +70 c { 2.0 ppm } d: -20 to +75 c { 2.0 ppm } e: -30 to +75 c { 2 .5 ppm } f: -40 to +85 c { 5.0 ppm } 015: 1.5 ppm 020: 2.0 ppm 025: 2.5 ppm model / supply voltage tc5= 5.0 volts 5% 3tc5= 3.3 volts 5% stability vs. temp vs. vcc aging 0.5 ppm maximum over vcc 5% 3 ppm first year, 1 ppm per year thereafter at 25 c 5% frequency adj by trimmer 3 ppm minimum 1 volt p-p minimum output voltage levels supply current (icc) 2 to 5 ma max 10 k / 10 pf 030: 3.0 ppm 050: 5.0 ppm 100: 10.0 ppm logic c: clipped sine wave package 1 & 8 consult factory for available frequencies and specs. not all options available for all frequencies. a special part numbe r may be assigned. frequency stability is inclusive of frequency shifts due to calibration, temperature, supply voltage, shock, vibration a nd load .449 (11.4) .378 (9.6 .2 ) .079 (2.0 .2 ) .300 (7.62) 1 2 3 4 .04 (1.0) .260 (6.6) n.c. gnd out vcc .270 (6.86) .06 (1.5) solder pads trimmer on package 8 only, location may vary due to part size and factory abilities, part marking may var y from lot to lot and may contain our part number or an inte rnal code. 1 2 3 4 pl tronics , inc. 19013 36th ave. w, suite h lynnwood, wa 98036 usa manufacturer of high quality frequency control products . portions of the part number that appear after the frequency may not be marked on part (c of c provided) 10.00 mhz ? 60.00 mhz packaging bulk or 24mm tape 12mm pitch
|